06
6-3
Ed. 1 - 11/2017
1
230V~ 50Hz
Using power assisted pedalling
3. CHARGE THE BATTERY PACK
3.a - Activating the battery pack before use
The battery pack is supplied partially charged.
For this reason, it should be tested before recharg-
ing it.
- Press the button (1) to activate the battery.
· The four LEDs light up in sequence.
- Press the button (1), the LEDs light up for ap-
prox. 4 seconds, indicating the battery pack
charge level.
· If none of the LEDs light up it means that the
battery is completely discharged.
· If at least one LED lights up, the battery is at
least partially charged.
- Press the button (1) for 3 seconds to switch the
battery pack off.
Make sure that the battery pack is fully
charged (all four LEDs lit) before you use you
bicycle.
The battery switches off after 10 seconds.
3.b - Charging the battery pack
Always use the battery charger
supplied with the bicycle.
The battery pack may be recharged at any
moment, without affecting the duration,
however:
In order prolong battery life, it
should not be recharged too often,
or left in the discharged state for
more than two months at a time.
