07
7-6
Ed. 1 - 11/2017
f
d
d
f
Cleaning and Maintenance
- Insert the transport block (f - supplied) be-
tween the brake pistons.
Never operate the hydraulic brakes when the
wheel unit has been removed. Use the trans-
port blocks (f - supplied) and remember to re-
move them before replacing the front wheel.
Take care no to lose the two spacers (d).
5.c - Mounting the front wheel
Make sure that the two spacers (d) are in po-
sition.
- Remove the transport block (f) from the brake
pistons.
Do not operate the front brake lever.
- Insert the wheel in the fork, making sure that
the brake disk is positioned between the brake
pistons.
- Insert the axle pin from the brake opposite side
and push it until it protrudes from the other
end of the wheel hub.
