16
Note:
a) In
“Voice recording mode”, press “Record” key and the system starts recording. Voice recording
duration is displayed on the bottom of the TFT display screen and the green indicator twinkles slowly; if
press “Record” key again, the system will stop and save the current audio file.
The green indicator turns off and the red indicator remains bright and the unit returns to the preview
mode (the corresponding operation is displayed on the LCD segment screen).
b) During
“Sound recording”, the product is responsive only when pressing “Stop”, “Off” or “M” key. If
you may switch to video recording, the sound recording will be automatically stopped and saved.
c) The laser icon will be displayed on the top left corner of the preview interface when turning on the
function of
“Laser synchronous shooting”, which indicates the system is in this shooting mode. At this
time, the laser will be turned on when starting recording and it will be turned off when stopping
recording.
d)
When “Pre-recording” and “Self-recording” mode are both activated, press “REC” key during pre-
recording to start self-
recording countdown. Press “REC” key again to start self recording and the clips
taken in last few seconds in pre- recording status can be saved as the beginning of the video.
2. Setting the camcorder parameter:
a) Image resolution: Select 3M, 5M or 8M.
b
) Single shot: Press “Shutter” once can take one photo.
c) Triple Shot: P
ress “Shutter” once can take three photos continuously.
d) Continuous shoot: Takes one photo every 0.5s/1s/2s/5s/10s/20s/30s/60s until you press a key to
stop, the card is full or the power is run out.
