22
b) Triple shot:
Press “M” key to enter the camcorder setup interface, press “>”or “<” key to move the
cursor to “
”, and then press “+”or “-” key to select the menu “Three Photos Continuous Shooting”,
and press “OK” key to confirm. Press “M” key to exit the setup interface. Pressing “Shutter” once at
this time the unit will continuously shoot three photos.
c) Continuous shoot:
Press “M” key to enter the camcorder setup interface, press “>” key to move the
cursor to “
” and then press“+”or “-” key to select the menu “Continuous Shooting”, and press “OK”
key to set the continuous shooting interval time to
0.5s,1s,2s,5s,10s, 20s,30s,60s. Press “M” key to
exit the setup interface. Press “Shutter” at this time, and the unit will start shooting one photo every
0.5s, 1s, 2s, 5s, 10s, 20s, 30s, 60s until you
press “Shutter” key again to stop.
d) Self Shot:
Press “M” key to enter the camcorder setup interface, press “>”or “<” key to move the
cursor to “
”, and then press“+”or “-” key to select the menu “Self-timer”, and press “OK” key to set
the delay time as 3s, 5s or 10s. Pres
s “M” key to exit the setup interface. Press “Shutter” once and the
unit will start the timer and take a single photo at the end of the delay time.
Note:
a) If the memory space gets full, the system will give the messa
ge “card is full' on TFT display screen
and goes back to the preview mode
b) The self-timer has to be re-started in order to take another self-shot.