21
give the message
“Low Battery” on the TFT display and then turn off
c) If the memory space gets full during video recording, the system will save the current file and give
the message
“card is full” on the TFT display screen then and go back to the preview mode. The video
recording duration on the LCD screen also will stop displaying.
d) In cyclic recording mode, the system will auto save a file every 15 minutes. (The self-timer mode
and continuous shooting mode cannot be activated at the same time)
e) After it the unit is fully charged, the continuously record time is about 2.5 hours. The continuous
voice recording time is about 3 hours.
f) Pressing
“+” or “-” key in voice recording mode cannot increase/ reduce the volume; however
pressing
“+” or “-” key in audio playback mode can increase/ reduce it.
g) Connect the unit to high-definition display device with HDMI cable in preview mode and the basic
operation of the unit can be finished on the high-definition display device.
4. Photo shooting
You can set the image resolution before shooting photos. Press “M” key to enter the setup interface,
pres
s “>”or “<” key to move the cursor to “
”, select “Image Resolution”, and press “OK” key to
enter the resolution setup menu. There are three resolution modes available:
3M: Photo shooting resolution of 2048x1536;
5M: Photo shooting resolution of 2592x1944;
8M: Photo shooting resolution of 3200x2400;
a) Single shot:
In preview mode, press “Shutter” to take a photo with a “Click” sound. The front side red
indicator will twinkle (the photo shooting icon on LCD segment screen will twinkle) and it will return to
the preview mode.
