17
e) Self-Timer Mode: Select
time to count down (“3s”, “5s” or “10s”) and press “M” to return to preview
status. Press “Camera” and the countdown starts. The self-timer indicator light flashes after the
countdown takes a snapshot. The self-timer mode remains activated as default. In order to switch to
single snapshot mode, please manually turn off self-timer mode.
f) Time display: In the preview st
atus, press “M” to enter the camcorder setting interface. If “Time
Display” is activated, the shooting date and time will automatically appear at the right bottom of the
screen during shooting.
Shooting date and time will not appear on the screen in case “Time Display” is
not activated.
Note:
a) The self-timer mode remains activated as default. In order to switch to single snapshot mode,
please manually turn off self-timer mode.
b) The self-timer mode and continuous shooting mode cannot be activated at the same time.
3. Setting of system parameter:
a) Beep: Turn on or turn off the key tone.
b) Self lamp: Please turn it on or off before self timing,
the default setting is “ON”.
c) Loop coverage: The video/ audio file will be auto saved in segment once every 15 minutes when
setting
“Loop Coverage”. If it is not set, the video/ audio file will be auto saved in segment once every
30 minutes.
Note:
The current actual segment file is determined by the file size set, but not determined by the true time,
that is to say, the file will be segmented more than 15/30 minutes at a dark environment.
