Rev. 17
112/119
8.8.
Commissioning
It is recommended that the following safety measures are taken before starting up the facility for
the first time, or after a trip event:
•
Once all of the connections have been made, we recommend a check to make sure that
they are correct, safe and well attached.
•
The "complete test" menu procedure should be applied.
NOTE! See 5.10.
•
It is important to check that the measurements are correct once the facility has been
powered up.
Maintenance
:
FANOX recommends a minimum of one facility inspection per year, to at least go
through the test menu and check the values of the measurements.
Summary of Contents for SIA-F
