FANOX SIA D, User Manual, Page: 72 / 117

www.fanox.com
SIA-D_
Rev. 07
72 / 117
ISO 9001:2008
7.7.12. Events Menu
From the standby mode screen, press the “OK” key to access the first line of menus. Use the
“
▲ ” and “ ▼ ” keys to position the cursor over the “EVENTS” screen and the number of events in
the buffer will be displayed. Press "OK" and use the “ ▲ ” and “ ▼ ” keys to position the cursor
over the events.
EVENTS Date-time
"OK"
"C"
"C"
"C"
0/499 "OK"
"OK ó C"
"OK"
"OK ó C"
"OK"
"OK ó C"
"OK"
"OK ó C"
"C"
There are --- Event description
associated measure
Event description
Date-time
Event description
Date-time
Event description
Date-time
Event description
1/499 associated measure
Event description
2/499 associated measure
Event Description
3/499 associated measure
Event description
The “ ┘ ” and “ ┐ ” shows the event has been caused by the activation or reset of the associated
status.
To delete the events buffer, position the cursor over the events menu and press and hold the
"RESET" key, until there is only one event shown. This one event is "Deleted events".
Each event contains the following information:
•
Date-time
•
Description of the event
•
Size of the events buffer
•
Position of the event within the list of events
•
Events generated by a status activation or reset
•
Associated measurement (if it has one)
7.7.13. Counters Menu
The first line of menus can be accessed from the standby mode screen by pressing the “OK”
key. Use the “
▲ ” and “ ▼ ” keys to move the cursor through the different screens until it is
positioned over the "COUNTERS" screen. Press "OK" and use the “ ▲ ” and “ ▼ ” keys to view
the different counters. The information displayed below the meter name is its value.
The password must be entered before attempting to change a counter for the first time. Meter
changes are allowed once the password has been entered, until the standby mode screen is
Date
Event description
Activated or
Not activated
01/01/00 00:54:18600
Events erased
1/275 measurement
Events erased
Associated measurement
Time