FANOX SIA D, User Manual, Page: 68 / 117

www.fanox.com
SIA-D_
Rev. 07
68 / 117
ISO 9001:2008
Press the “
OK
” key to access the second level from the main screen. Use the ▲ and ▼ keys to
move from one menu section to another in the second level. Use the “
C
” key to return to a
higher level.
7.7.9. Measurements Menu
From the standby mode screen, press the “OK” key to access the first line of menus. Use the
“
▲ ” and “ ▼ ” keys to position the cursor over the “MEASUREMENTS” screen and press “OK”.
Use the “ ▲ ” and “ ▼ ” keys to position the cursor over the measurement and to see its value.
MEASURES
IA:
IB:
I0:
"OK"
"C"
"C"
"C"
-,-- A
-,-- A
IC:
-,-- A
-,-- A
"C"
V0:
-,-- A "C"
7.7.10. Status Menu
From the standby mode screen, press the “OK” key to access the first line of menus. Use the
“
▲ ” and “ ▼ ” keys to position the cursor over the “STATUS” screen and press “OK”. This takes
you to the status groups line. Use the “ ▲ ” and “ ▼ ” keys to position the cursor over a group of
statuses, and press the “OK” key to access the statuses that belong to this group. Use the “ ▲ ”
and “ ▼ ” keys to browse through the different statuses. The information shows whether or not
each status is active. The message “>Activations present” appears under the name of the
group in the status group menus if any of the statuses in that group are active.
The method for navigating through the status menu is shown graphically below.