Fanotec MECHA C1, User Manual

Page: 98 / 122

98
MECHA User’s Guide v.06 ‒ Dual Axis
© 2021 FANOTEC
Other Pairing Methods
zLM ‒ Automatic Pairing Using Buttons
This is a zero learning method ‒ zero Learning MECHA ‒ for firmware 02011
or newer.
As you already know, we communicate with MECHA through a web interface
or using its own buttons, especially to enter some codes. We use the power
button,
P
, to enter 0 (zero) on the MECHA unit. Therefore, a code that
starts with zero, we call it a power code.
In the
zLM method of pairing, the first step is to create a code ‒ a power
code, and the second, to use this code to pair the MECHA units.
Step 1
Create an 8-digit code followed by the greater-than sign , as follows:
● the first digit must be 0 (zero)
● the next sequence of seven digits must be a combination of the
digits 1 , 2 , and 3 , so that two identical digits are not in consecutive
positions
● add the greater-than sign (>) at the end
Example:
Please do not use this code, because you will also use it as a pass-
word.
0
1 2 3 1 2 3 1
>
When the power code is entered in both MECHAs, these two
MECHA units connect automatically and become a Dual Axis
Combo (DAC).