Fanotec MECHA C1, User Manual

Page: 67 / 122

67
MECHA User’s Guide v.06 ‒ Dual Axis
© 2021 FANOTEC
For those interested in technical details, see below zLM 2 explained.
First, please read the chapter about the UI.
MECHAs will be automatically paired and will remain paired after power
OFF then ON.
This procedure will create
MECHA-H-DAC with password 12345678 and
MECHA-V-DAC with password 12345678
If in /config of MECHA-H, the SSID name is changed and password is
changed, if both MECHAs are ON and paired, the SSID and password will
be changed in MECHA-V as well, as long as SSID starts with MECHA-H in
the first one.
So after the MECHAs are paired and the SSID and name is changed in
config of MECHA-H, say, from MECHA-H-DAC to MECHA-H123 with
password 87654321, MECHA-V will receive the name MECHA-V123 and
the same password: 87654321.
As a result of these, without using any method of pairing, a MECHA-V999
in STA mode will always try to pair with MECHA-H999 if its SSID is ON, and
both have the same password and only the H-V difference in SSID name.
This also opens the way to pair remotely two MECHAs via support, if
needed, if they can access the Internet.