Fanotec MECHA C1 User Manual Download Page 78

Page: 78 / 122

MECHA User’s Guide

v.06

‒ Dual Axis

How to Create Your Own Presets Using the UI

Besides the very simple method with buttons only (see

Panorama with

Automatic Shooting Pattern

), and the url with parameters method (see

Programming a Preset Using Parameters

), the following is the method using

the UI.
Access the User Interface (UI) of MECHA-H using a device or computer (see

How to Access the UI

) and tap/click the

[Row]

button to access the

Row

page.

First, let's analyze some default presets.

Default Presets

An easy way to create a preset is to load one from the

Presets

list, and

modify it as needed, then save it with a different name.

Factory (F) presets

‒

cannot be overwritten

●

FE 12mm NZ Level

— for 12mm fisheye lenses, 4 shots around, plus

nadir and zenith, starting from

level

position.

●

FE 16mm NZ Level

— for 16mm fisheye lenses, 6 shots around, plus

nadir and zenith, starting from

level

position.

●

FE 20mm ZN Level

— for 20mm fisheye lenses, 6 shots around, 2

rows ‒ at -30° and +30° ‒ plus zenith and nadir, starting from

level

position.

●

FE 24mm ZN Level

— for 24mm fisheye lenses, 8 shots around, 2

rows ‒ at -30° and +30° ‒ plus zenith and nadir, starting from

level

position.

●

TEST 1312 Parked

— 12 shots around, 3 rows ‒ at 0° and +/-45° ‒

plus zenith and nadir, starting from

parked

position.

●

TEST 1313 Level

— 12 shots around, 3 rows ‒ at 0° and +/-45° ‒ plus

zenith and nadir, starting from

level

position.

●

TEST 1321 Raised

— 12 shots around, 3 rows ‒ at 0° and +/-45° ‒

plus zenith and nadir, starting from

raised

position.

●

TEST 131

— 6 shots around (for single axis applications).

●

TEST 132

— 12 shots around (for single axis applications).

Summary of Contents for MECHA C1



























































































































Search results

Summary of Contents for MECHA C1

Reviews:

Brands by name

Popular brands

Fanotec MECHA C1, User Manual

Search results

Summary of Contents for MECHA C1

Reviews:

Brands by name

Popular brands