Fanotec MECHA C1, User Manual

Page: 97 / 122

97
MECHA User’s Guide v.06 ‒ Dual Axis
© 2021 FANOTEC
○ DNS: 8.8.8.8 (or leave the field blank)
3. Scroll to the bottom of the page and tap the [Apply] button.
4. Switch to config of MECHA-V (at the bottom of the page).
5. Set it in STA mode and enter the following values in STA Mode fields:
○ Static IP: 192.168.43.102
○ Subnet: 255.255.255.0
○ Gateway: 192.168.43.1
○ DNS: 8.8.8.8
6. Tap the [ Apply] button.
7. Tap the [Connect to Wi-Fi] button at the bottom of the page, then enter
MECHA-PHONE and the required password.
8. Switch to config of MECHA-H, tapping the button [H MECHA / config] ,
which should be visible at the bottom of the page.
9. Tap the [Connect to Wi-Fi] button at the bottom of the page, then enter
MECHA-PHONE and the required password.
10. Start MECHA-PHONE hot-spot.
MECHAs should connect to
MECHA-PHONE after a little while.
As a result :
● We have the MECHAs connected to a SSID with Internet access, provided
3g, 4g, so on, is available.
● This enables downloads of presets from server, updates and the use of
your phone for Internet browsing as usual.
● MECHA-H-DAC will be accessible always at 192.168.43.101, and
● MECHA-V-DAC will be accessible always at 192.168.43.102
All you have to do is turn MECHA-PHONE hot-spot on when powering up
MECHAs, and to maintain it on while using MECHAs, for example disable any
automatic turn-OFF of hot-spot on phone/device.
Now your device is connected to the Internet and to MECHAs, and you can
download presets from server.