FaroTek
Connecting the parts of the FaroTek system
19
Nbr. Cable
Wire
Connection
1
Power input (115/230V)
Terminal L
Terminal N
Terminal PE
2
Ethernet 1 to the PC
TX+ (orange / white)
TX- (orange)
RX+ (green / white)
RX- (green)
3
Ethernet 2 to the first TouchTek box
TX+ (orange / white)
TX- (orange)
RX+ (green / white)
RX- (green)
4
Extension bus OUT to the first FillTek /
AlarmTek
Minus (green)
Data+ (white)
Data- (brown)
+24V (yellow)
1.
Connect the FillTek and AlarmTek to the TouchTek server
Route the cable PIONET LIYCY (TP) 2X2X0,75 MM2 (4) into the first FillTek or AlarmTek. If there are more
FillTek or AlarmTek, then route a bus cable from the FillTek/AlarmTek to the second AlarmTek/FillTek and so
on until all AlarmTek/FillTek are connected to a bus cable.
2.
Connect the TouchTek server to the Ethernet network
Route the ETHERNETCABLE CAT5 TWISTET PAIR (3) to the first TouchTek box.
3.
Connect the TouchTek server to the PC
Route the ETHERNETCABLE CAT5 TWISTET PAIR (2) to the PC.
Connect the RJ45 plug to the Ethernet cable and plug it into the PC's RJ45 jack intended for this purpose (for
more information see the connection diagram in the RJ45 packing).
RJ45 plug & Ethernet cable
PC
4.
Connect a power cable
Provide electrical power to the TouchTek server by routing a suitable power cable (1)
Electrical shock hazard. Danger to humans and animals. Installing must only be carried out by
an authorized installer, according to the prevailing regulations
Summary of Contents for FaroTek
Page 1: ...g...
