FaroTek
Connecting the parts of the FaroTek system
18
Connect the TouchTek box as follows:
1.
Connect the FaroTek power packs (4)
2.
Connect the TouchTek box to the Ethernet network
Route the ETHERNETCABLE CAT5 TWISTET PAIR (2) to the TouchTek server or to the previous TouchTek
box. Route the ETHERNETCABLE CAT5 TWISTET PAIR (3) to the next TouchTek box (if existing).
The cable between the TouchTek server and the first TouchTek box or between two TouchTek boxes
should not exceed 100 meter.
3.
Connect a power cable
Provide electrical power to the TouchTek box by routing a suitable power cable (1).
Electrical shock hazard. Danger to humans and animals. Installing must only be carried out by an
authorized installer, according to the prevailing regulations
4.
Protect the TouchTek box
Close the cover of the TouchTek box unit and make sure that the gasket as well as the cable glands are
properly positioned to prevent dirt and moisture from entering the TouchTek box unit.
Overview TouchTek server cables
Summary of Contents for FaroTek
Page 1: ...g...
