FaroTek
Installing the parts of the FaroTek system
6
The FaroTek dispenser is designed to be connected to a feed conveyor pipe with a diameter of
60/75mm. If the feed pipe diameter is out of this range, please contact the dealer or Fancom.
The connected feed conveyer will not be controlled by the FaroTek system. Please make sure that the
feed conveyer is configured on a way that (during feeding time) no FaroTek dispenser will be out of
feed.
1. Apply the template to one end of the drop pipe and drill the corresponding 3mm holes in the drop pipe. The
drill bits and template are enclosed.
2. Widen the individual hole with the enclosed 7mm drill bit.
3. Use the 7mm drill bit to widen the hole, as shown in the illustration.
Summary of Contents for FaroTek
Page 1: ...g...
