69
6.2.2 List of periodical inspection items
Table 6-3 List of periodical inspection items
No.
Position
Inspection items
Cycle
Method
Solution
1
Belt
Cleaning
Every 6 months Observation
Cleaning
2
Filter
Cleaning
Once 6 months Observation
Cleaning
3
Circulating
lubricant
First oil change
3 months
Lubricant
replacement
See 6.3
Circulating
lubricant
Filling
Once 3 months Observation
Filling
Circulating
lubricant
Lubricant replacement
Once a year
Lubricant
replacement
See 6.3
4
Rotor
bearing
Cleaning and lubricant
level
Once a month
Observation Cleaning and
lubricant
refilling
5
Belt and belt
pulley
Check on belt if in good
tensioning condition
Once every 2
weeks
Observation
Adjustment
6
Chain and
sprockets
Cleaning and
lubricanting
Once a month
Observation Cleaning and
lubricant
refilling
Chain and
sprockets
Check on chain if in good
tensioning condition
Once every 2
weeks
Observation
Adjustment
7
Sealing
device
Cleaning and aging
conditions
Once a month
Observation
Replacement
8
Safety device
Check on warning signs
if missing or worn out
Once a month
Observation Cleaning and
replacement
Safety switch on access
door
Once a month
Observation
Cleaning
Notes:
(1) Assuming the duty cycle as 12h a day and 25 days a month. Customers can adjust it by
themselves according to actual conditions.
(2) Three recommended greases for bearing:
①
LITEAEP6-077(ASEOL)
②
BEACOMPZ (ESSO)
③
ARALUBHLP (ARAL)
Gear motor: ZL-2 lithium lubricating grease or ISOV9220 produced by Mitsubishi;
Chain: GB492-65Zn-3