34
English
Note:
Use of aluminium pans may cause metallic marking of the
pan supports. This does not aff ect the durability of the
enamel and may be cleaned off with a metal cleaner polish.
The Wok cradle
The Wok cradle is designed to fi t a Typhoon™ Professional
35cm Wok (Part Code 13840S)
This is available from leading retailers.
If you use a diff erent Wok make sure that it fi ts the cradle. Woks
vary very widely in size and shape. It’s important that the Wok
sits down on the pan support - but if the Wok is too small the
cradle will not support it properly.
The cradle should be used on the triple ring Wok burner only.
When you fi t the cradle check that the Wok is properly located
on the front and rear fi ngers and that it is supported properly
on a pan support.
Make sure the cradle is stable and that the Wok is sitting level
in the ring.
The cradle will get very hot in use - allow plenty of time for it to
cool before you pick it up.
Care and Cleaning
Essential information
Never use paint solvents, washing soda, caustic cleaners,
biological powders, bleach, chlorine based bleach cleaners,
coarse abrasives or salt.
Recommended cleaning materials are hot soapy water, a
moistened soap pad, cream cleaner or a nylon scourer.
The Griddle
1
The griddle fi ts a single pan support, front to back. It is
designed for cooking food on directly. Don’t use pans of any
kind on it. The griddle surface is non-stick and metal cooking
utensils (e.g. spatulas) will damage the surface. Use heat
resistant plastic or wooden utensils.
2
Don’t put it crossways - it will not fi t properly and will be
unstable.
Don’t put it on the Wok burner - it is not designed to fi t the
Wok burner pan support.
