NAVI-XS POI U
SER
’
S
G
UIDE
V
ERSION
1.00
4.1.3 Navigation with NAVI-XS POI Bluetooth™ GPS Receiver
As soon as you have installed and configured the Falcom NAVI-XS POI on your
mobile equipment (Pocked PCs), and the unit has already got a valid GPS fix, the
inserting of navigation is anymore in the way. You have just to run the installed GPS
Mapping software. The Bluetooth™ connection for the installed GPS Mapping
software must be set to the correct COM port (please refer to the user
documentation of the installed GPS Mapping software for instructions). Determine
which COM port number your Bluetooth™ device uses for serial COM port
connections (in our example is COM 7). The FALCOM NAVI-XS POI communicates to
a Bluetooth™ serial port with the following settings:
up to 115200 bps, 8 Data Bits,
NONE parity, 1 Stop Bit
.
Depending on the device you use for Bluetooth™
connectivity, you may or may not need to modify the COM port setting. If necessary,
refer to the user documentation of your Bluetooth™ device. In order to navigate to
your destination, please, refer to the user documentation of installed GPS Mapping
software for instructions. There you will find the methods for setting the destination
and following the navigation instructions to travel to your destination.
We wish you much fun and have a good trip using FALCOM NAVI-XS POI.
!!!
Please remember that:
Safety to traffic has always priority! Please use the FALCOM NAVI-XS POI
only in such a way that you always keep control of your vehicle in all traffic
conditions.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 26
