NAVI-XS POI U
SER
’
S
G
UIDE
V
ERSION
1.00
2) The SiRFdemo software will appear as follow:
(i) Before running the software, make sure that your PC is recognizing the
NAVI-XS POI properly. On the activated
Data Source Setup
window,
select the COM (e.g. COM9) for SiRFdemo program and set the baud
rate e.g. to 38400 bps. See figure below:
(ii)
Click the icon on toolbar by the up-down button (marked button in
figure below) the program will automatically detect the selected COM
port and starts evaluating.
(iii) The output messages can be displayed in the
Development Data
screen.
For a description of NMEA messages please download from Falcom’s
Website the
“
SiRFmessages.pdf
”
file. The valid/invalid protocols can be
recognized in the $GPRMC protocol as shown in figure below. The
capital letter
A
means incoming protocols are valid, and the capital
letter
V
means incoming protocols are invalid.
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
Page 21
