13
Connecting the remote control
·A New remote control has to establish a new connection to the cooker hood when
used for first time. One remote control could possibly control several cooker hood at
the same time.
Connection process between remote control and cooker hood
·Press
on control panel of the cooker hood, the backlight display is on, the
cooker hood is in standby mode.
·Press
for 5 seconds, the indicators light begin flashing from one button to
another ,the cooker hood it in connection mode, press any bottom on remote control to
confirm the connection. The connection process finished and the remote control can
be used for speed selection, lighting and timer setting.
·If you want to connect again, you will need to clear the code that has been set up
previously.
·To clear the code, press
for 5 seconds, the indicators light begin flashing from
one button to another, the cooker is in connection mode. Then, press
again for 5
seconds, the previous connection code is cleared.
·When the previous code has been cleared, the cooker hood back to standby mode,
press
for 5 seconds, the indicate light flashing from one button to another ,the
cooker hood is in connection mode, then, press any bottom on remote control to
confirm the connection.
Remote control
Lighting
press button once, the light is on, press again, the light is off.
The lighting button
it is controlled separately and will not affect any other functions.
Turning on/ Increasing motor speed
