10
7. Then as pic 9 shown, choose the direction of the outlet
①
/
②
/
③
/
④
a. Refer to Pic 7,open the decorative plate in order,and take out the filter.
b. Refer to Pic 8,unscrew and take away the 4 pcs ST4*8mm screws that on the panel
decorative strip.
c. Unscrew the 8pcs machine silk from the bottom of the cabinet housing and rotate it
by 90°/180°/270° to choose the direction of the outlet, then screw the 8 pcs machine
silk to fix the housing well;
d. Install the panel decorative strip and filter well following the opposite order of a/b
steps above,meanwhile, install the expansion pipe to the outlet(refer to pic 10).