background image

User manual of ZWP15 controller 

Contents

 1.Description..........................................................................................................................................................2

 2.Installation of ZWP15 controller.........................................................................................................................3

 3.Controller programming  ....................................................................................................................................4

 3.1.Adding device to network (INCLUDE function)........................................................................................5

 3.2.Associating device with a pair of buttons on the controller (ASSOCIATE function)................................6

 3.3.Associating another controller with the network (LEARN MODE)...........................................................7

 3.4.Deleting device from a pair of controller buttons on the controller (DELETE function)...........................8

 3.5.Excluding device from the network (EXCLUDE function)........................................................................9

 3.6.Restoring default settings in the controller (DEFAULT function)............................................................10

 3.7.Removing SECONDARY controller from the network ...........................................................................10

 3.8.Special function ASSAIN A ROUTE........................................................................................................11

 4.Technical parameters ........................................................................................................................................11

 5.Remote control..................................................................................................................................................12

 6.Battery replacement ..........................................................................................................................................13

 7.Warranty............................................................................................................................................................14

12.06.01 NC811-GB

1/16

©2012, 

FAKRO

GB

Summary of Contents for ZWP15

















Reviews: