Fairlight Prodigy User Manual Download Page 55

Page: 55 / 76

User Manual

Page

DEL SEL

Allows multiple selected Cues to be deleted. Touch the SEL field of all Cues to be copied, then touch DEL SEL.

ALL/NONE

Selects all Cues. If already selected, deselects all Cues.

SETUP

Opens a screen allowing you to customise the behaviour of selections during COPY and MOVE operations.

RECORD

Opens a screen which allows you to enter Cues on the fly while the transport is running. The timecodes are captured

from Prodigy's current position.

ADD/INS

Allows you to add events to the Cues. Click ADD/INS, then touch the type of Event (icons above) then drag the icon

to the Event(s) field of the Cue.

EDIT

Click EDIT, then touch the Event icon in a Cue, allowing you to determine exactly what the event is.

DELETE

Allows you to delete an event. Click DELETE, then touch the event to be deleted.

PREV

Allows you to preview an event. Click PREV, then touch any event. It will immediately be executed in isolation from

any others.

Summary of Contents for Prodigy













































































Search results

Summary of Contents for Prodigy

Reviews:

Related manuals for Prodigy

Brands by name

Popular brands

Fairlight Prodigy, User Manual

Search results

Summary of Contents for Prodigy

Reviews:

Related manuals for Prodigy

Brands by name

Popular brands