Fairlight Prodigy User Manual Download Page 12

Page: 12 / 76

Page

User Manual

CUES

COMMS

Screen for assignment of talkback to appropriate destinations.

MASTER

AUXES

Sets the master level and output assignment for aux busses and multitrack busses.

VFX

Virtual Effects. Allows control of external MIDI devices from an animated screen.

METERS

Places meters on the screen. You may also choose and edit meter sets, which are arrangements of meter numbers,

source channels and types that have been saved with the current title or preset.

MATRIX

Gives you a picture of your X-Point switching system, and allows you to change the connections. The Matrix setup

is saved as part of the current title.

FADERS

TO..?

Allows you to switch the faders to control such things as the Aux send level from each channel, or the send level to

the 6th (Boom) channel of a 5.1 mix setup.

Record

Allows users to record automation.

Summary of Contents for Prodigy













































































Search results

Summary of Contents for Prodigy

Reviews:

Related manuals for Prodigy

Brands by name

Popular brands

Fairlight Prodigy, User Manual

Search results

Summary of Contents for Prodigy

Reviews:

Related manuals for Prodigy

Brands by name

Popular brands