User Manual
Page
11
DYN
Shows a graph of the Dynamics setting for the currently selected signal path, which changes as the Dynamics are
altered.
CR MON
+
STUDIO
Allows you to see and change the sources feeding your monitoring system.
6.
User Interface
6.3 System Modes
The System Mode Keys determine which display is shown on the user interface. To enter a mode, press the
System Mode key. To exit, press the same System Mode key again, or press the CLOSE command on the touch
screen. This will return you to the fader screen.
The available system modes are:
CHAN
CONFIG
Allows you to see and change the physical input and output, insert send and return and buss assignment of any
signal path. The channel selected when you open the screen will be the same one you have selected for the CAP,
and you can change the selection by the same methods. These are:
by pressing the INT button on any fader
by touching the fader (if Assign to CAP via Touch Sensors has been checked on the Preferences screen)
by soloing the fader (if Assign to CAP via Solo Switches has been checked on the Preferences screen)
by pressing the Assign button on the CAP and choosing a signal path from the screen
by touching the Feed name at the top of the screen and choosing from the new screen that appears
E Q
Shows a graph of the EQ setting for the currently selected signal path, which changes as the EQ is altered. A library
of saved EQ settings is also shown, and these can be auditioned with the current setting. The channel selected when
you open the screen will be the same one you have selected for the CAP, and you can change the selection by the
same methods. These are listed in the previous paragraph.
