Fagor CNC 8070, Programming Manual

Page: 18 / 556

VIII
CNC 8070
Ver
s
io
n
hi
st
or
y
(S
OFT
V02.0
X
)
VI
January of 2005 Software: 2.0x
Manual mode (jog). Programming of feedrate “F” and spindle speed “S”. OPT
Axis selection/deselection for handwheel jog. OPT
Theoretical path simulation. OPT
Definition of the first block of a block search. OPT
Confirm that the CNC is not in automatic mode when executing a program. OPT
Syntax check in MDI. OPT
Feature
Feature
Operation under Windows XP INST
Emergency shutdown with battery (Central unit PC104) OPT
New languages (Basque and Portuguese) INST
Multi-channel system, up to 4 channels.
• Spindle swapping
• Axis swapping
• Communication and synchronization between channels.
• Common arithmetic parameters.
• Access to variables per channel.
INST
PRG
OPT
Multi-spindle system, up to 4 spindles PRG / INST
Tool management with up to 4 magazines. INST
Tandem axis. INST
New kinematics table-spindle (TYPE13 to TYPE16). INST
New kinematics for C axis (TYPE 41 to TYPE 43) INST
Parameter matching between the CNC and the Sercos drive INST
New machine parameters.
• Warning level on Gantry axes (WARNCOUPE)
• Placing the vertical softkeys on the right or on the left (VMENU).
• Apply cross compensation to either theoretical or real coordinates (TYPCROSS).
• Apply leadscrew compensation to either theoretical or real coordinates (TYPLSCRW).
• Defining the default compensation mode (IRCOMP).
• Defining the type of reference pulse (REFPULSE).
• Memory sharing between applications (PLCDATASIZE).
• Generic OEM machine parameters (MTBPAR).
• Reading Sercos variables from the CNC (DRIVEVAR).
• Backlash peak compensation (BAKANOUT, BAKTIME, ACTBAKAN).
INST
The behavior of rotary axes has been changed. Machine parameters AXISMODE,
UNIDIR, SHORTESTWAY. INST
Possibility of Sercos transmission at 8 Mhz and 16 Mhz. Parameter SERBRATE. INST
Define the anticipation time for the axes to be considered to be in position. Machine
parameter ANTIME and the PLC mark ADVINPOS. INST
The "(V.).TM.MZWAIT " variable is not necessary in the subroutine associated with M06. INST
Filters to eliminate the resonance of the spindle when it works as C axis or in rigid tapping. INST
PLC. The TMOPERATION may take the values 13 and 14. INST
PLC. New mark MMCWDG to detect that the lockup of the operating system. INST
PLC. Accessing arithmetic parameters and OEM parameters with CNCRD returns the
value multiplied by 10000 (reading in float mode). INST
PLC. The CNCEX command and the FREE mark to execute a CNC block.
New commands at the PLC.
• New mark to disable the cross compensation tables (DISCROSS).
• New mark to correct the parallelism on Gantry axes (DIFFCOMP).
• Definition of external symbols (PDEF).
INST
New variables.
• Software version.
• Variables to be set via PLC.
• Variables for adjusting the position.
• Fine adjustment variables.
• Feedback inputs.
INST / PRG