Fagor CNC 8058elite T, Manual

Page: 36 / 90

Probing (·T· model).
CNCelite
8058 8060
8065
2.
PRO
B
IN
G.
G100
/G103
. Probi
ng.
ꞏ36ꞏ
R
EF
. 2106
Properties of the function and Influence of the reset, turning the
CNC off and of the M30 function.
Functions G100 and G103 are not modal. After executing one of these functions, the CNC
restores the function G0, G1, G2 ó G3, G33 or G63 that was active.
Updating variables after probing.
When done probing, the CNC updates the following variables. After a probing, the CNC
updates all the variables of all the axes of the channel even if they were not involved in the
probing movements. For the axes not involved in the probing movements, the variables that
save the measured value take the value of the real position of the axis and the variables that
indicate the measured error are reset to zero.
Mnemoni. Variable.
V.G.MEASOK The probe has made contact (G100) or stopped making contact (G103).
• The variable takes the value of ꞏ1ꞏ if the probe has made contact (G100)
or has stopped making contact (G103).
• The variables takes the value of ꞏ0ꞏ if the probe reaches the programmed
coordinate.
V.A.MEASOK.xn Probing done on any axis of the channel.
• The variables of the axes involved in the probing operation take the value
of ꞏ1ꞏ when the probing movement ends.
• The variables of the rest of the axes take the value of ꞏ0ꞏ.
The variable keeps its value after a reset.
V.G.PLMEASOK1
V.G.PLMEASOK2
V.G.PLMEASOK3 Probing on the plane axes completed.
• The variables of the axes involved in the probing operation take the value
of ꞏ1ꞏ when the probing operation ends.
• The variables of the rest of the axes take the value of ꞏ0ꞏ.
V.A.MEAS.xn Measured value. Machine coordinates of the tool base.
• The variables of the axes involved in the probing operation take the
measured value.
• The variables of the rest of the axes take the real position value of the
axis.
V.A.ATIPMEAS.xn Measured value. Part coordinates of the tool tip.
• The variables of the axes involved in the probing operation take the
measured value.
• The variables of the rest of the axes take the real position value of the
axis.
V.G.PLMEAS1
V.G.PLMEAS2
V.G.PLMEAS3 Value measured on the axes of the plane. Part coordinates of the tool tip.
• The variables of the axes involved in the probing operation take the
measured value.
• The variables of the rest of the axes take the real position value of the
axis.