Fagor CNC 8058elite T, Manual

Page: 82 / 90

Probing (·T· model).
CNCelite
8058 8060
8065
4.
CANNED CYCLES. CYCLE EDITOR.
Pa
rt m
ea
su
ring
a
lo
ng
the abscissa axis.
ꞏ82ꞏ
R
EF
. 2106
4.5.1 Programming the cycle.
Probe data.
ꞏTpꞏ Number of the tool that identifies the probe.
Number of the tool used to define the probe in the tool table.
ꞏDpꞏ Number of the tool offset that identifies the probe.
Offset associated with the probe, used to execute the cycle.
Probing movement.
ꞏXꞏ Theoretical coordinate of the probing point along the ordinate axis.
Theoretical ordinate coordinate of the point being measured. This value is given in the active
units, radius or diameter.
ꞏZꞏ Theoretical coordinate of the probing point along the abscissa axis.
Theoretical abscissa coordinate of the point being measured.
ꞏDsꞏ Safety distance.
This parameter only admits positive values greater than 0 (zero).
Distance with respect to the point to measure and along the abscissa axis, to which the probe
approaches in G00 before making the probing movement. The probe must be placed, with
respect to the point to be measured, at a distance greater than this value when the cycle
is called.
ꞏFꞏ Probing feedrate.
This parameter sets the probing feedrate. The rest of the movements will be carried out in
G00.
Tool wear compensation.
Tool wear correction is optional. If it is activated, the correction only takes place when the
measuring error exceeds the programmed value.
ꞏTꞏ Tool to be corrected.
Optional parameter; by default, undefined. If T=0 (or not programmed), the CNC does not
correct any tool wear.
Tool whose wear is to be corrected, which will be the tool used to machine the surface.
ꞏDꞏ Tool offset to be corrected.
Tool offset whose wear is to be corrected, which will be the tool offset used to machine the
surface.
ꞏWTꞏ Tolerance for the measuring error.
Optional parameter, by default 0. This parameter only admits positive values.
If the measuring error (difference between the theoretical and the real values) is within this
tolerance, the CNC does not change the tool data. If the measuring error is equal to or greater
than this tolerance, the CNC corrects the data of the tool defined in parameters ꞏTꞏ and ꞏDꞏ.
Wear correction active.
No tool wear correction is applied if this box is not selected.