Fagor CNC 8058elite T, Manual

Page: 66 / 90

Probing (·T· model).
CNCelite
8058 8060
8065
4.
CANNED CYCLES. CYCLE EDITOR.
Too
l ca
lib
ra
tion.
ꞏ66ꞏ
R
EF
. 2106
Tabletop probe.
Executing this cycle requires a table-top probe, installed in a fixed position of the machine
and with its sides parallel to the axes of the plane. The probe position must be given in
absolute coordinates referred to machine reference zero using the machine parameters
PRB1MIN, PRB1MAX, PRB2MIN, PRB2MAX, PRB3MIN, PRB3MAX.
Data returned by the cycle after the measurement.
Once the cycle is over, the CNC will return the detected error in the following arithmetic
parameters. A detected error is the difference between the real tool length and the value
assigned in the table.
Once the cycle has concluded, it updates the dimensions in the tool table and initializes the
tool wears to 0 (zero).
P298 Error detected along the abscissa axis.
This value is given in radius.
P299 Error detected along the ordinate axis.
P297 Error detected on the axis perpendicular to the plane.
This value is given in radius.