Probing (·T· model).
CNCelite
8058 8060
8065
CA
NNED CYCLES. ISO CODED PROGRAMMIN
G
.
3.
#PROBE 1. Too
l ca
lib
ra
tion.
ꞏ47ꞏ
R
EF
. 2106
3.1.1
Programming the cycle.
The programming format for this cycle is. Optional parameters are indicated between angle
brackets.
#PROBE 1 B F <K> <X U Z W Y V>
ꞏBꞏ Safety distance.
This parameter only admits positive values greater than 0 (zero). Value defined in radius.
Distance with respect to the point to touch, to which the tool approaches in G00 before
making the probing movement. When calling the cycle, the tool must be located, with respect
to the point to be measured, at a greater distance than this value
ꞏFꞏ Probing feedrate.
This parameter sets the probing feedrate. The rest of the movements will be carried out in
G00.
ꞏKꞏ Sides of the probe to be used.
Optional parameter, by default 0.
This parameter indicates how many sides of the probe will be used for calibration. In a "Plane"
type of axis configuration, two sides of the probe will always be used. In a "Trihedron" type
of axis configuration, it is possible to choose to use either two or three sides of the probe.
ꞏX U Y V Z Wꞏ Tabletop probe position.
They are optional parameters that usually need not be defined. In certain machines, due to
lack of repeatability in the mechanical positioning of the probe, the probe must be calibrated
again before each calibration. Instead of re-defining the machine parameters every time the
probe is calibrated, those coordinates may be indicated in these parameters.
Parameters X Z Y refer to the minimum coordinates of the probe on the first axis, second
axis and on the axis perpendicular to the plane respectively. Parameters U W V refer to the
maximum coordinates of the probe on the first axis, second axis and on the axis
perpendicular to the plane respectively.
This data does not modify the machine parameters. The CNC takes this data into account
only during this calibration. If any of this data is left out, the CNC takes the value assigned
to the corresponding machine parameter.
B
Safety distance.
F
Probing feedrate.
K
Optional. Sides of the probe to be used.
X··W
Optional. Tabletop probe position.
K=0
Calibration on the X, Z sides.
K=1
Calibration on the X, Z, Y+ sides.
K=2
Calibration on the X, Z, Y- sides.
Summary of Contents for CNC 8058elite T
