Fagor CNC 8055i, Installation Manual

Page: 650 / 732

·650·
Installation manual
CNC 8055
CNC 8055i
B.
S
OFT
: V02.2
X
Central un
it of th
e 8055
CN
C
PLC
Memory: 135 kb.
Programming in mnemonics.
1 millisecond time unit.
512 inputs.
512 outputs.
3999 user marks.
499 32-bit registers.
256 32-bit counters.
512 32-bit timers.
–
CPU
–
Module
32-bit processor
Math coprocessor
Graphics coprocessor.
1Mb CNC program memory.
3.5 ms block processing time , FL model.
0.9 ms block processing time, POWER model.
Sampling time configurable by the machine manufacturer; 2, 3, 4, 5 and 6 ms.
It has 1 RS232C communication line.
–
Vpp axes
–
module
It has 8 feedback inputs for up to 7 axes + spindle encoder or electronic handwheel. Four of these inputs admit
differential TTL and 1 Vpp sinusoidal signals; the other four admit differential TTL and non-differential TTL
signals.
Feedrates between 0.0001 mm/min and 99999.9999 mm/min (0.00001 inches/min and 3937 inches/min).
Maximum travel: ±99999.9999 mm (±3937 inches).
Up to 2 digital probes (±5 V or ±10 V) may be connected .
It has 40 opto-coupled digital inputs.
It has 24 opto-coupled digital outputs.
It has 4 differential analog inputs of ±5 V or ±10 V (that may be selected by machine parameter) for monitoring
external devices. Resolution 46.8 mV.
It has 8 analog outputs of ±10V (one per axis + spindle).
–
Vpp SB axes
–
Module
It has 4 feedback inputs for up to 3 axes + spindle encoder or electronic handwheel. Two of these inputs admit
differential TTL and 1 Vpp sinusoidal signals; the other two admit differential TTL and non-differential TTL signals.
Feedrates between 0.0001 mm/min and 99999.9999 mm/min (0.00001 inches/min and 3937 inches/min).
Maximum travel: ±99999.9999 mm (±3937 inches).
Up to 2 digital probes (±5 V or ±10 V) may be connected .
It has 40 opto-coupled digital inputs.
It has 24 opto-coupled digital outputs.
It has 4 differential analog inputs of ±5 V or ±10 V (that may be selected by machine parameter) for monitoring
external devices. Resolution 46.8 mV.
It has 8 analog outputs of ±10V (one per axis + spindle).
–I/Os – (Inputs - Outputs)
module
It has 64 opto-coupled digital inputs.
It has 32 opto-coupled digital outputs.
Digital inputs
Rated v24 V DC.