Fagor CNC 8055i, Installation Manual

Page: 396 / 732

·396·
Installation manual
CNC 8055
CNC 8055i
7.
CONC
EPTS
S
OFT
: V02.2
X
Gear rati
o ma
nag
ement on axes and
spi
ndl
e
Analog axes
1. External feedback connected to the CNC

Axis parameter DRIBUSLE (P63) = 0.
Parameters involved in the calculation of the velocity command:

Axis parameter G00FEED (P38) = Maximum feedrate of the axis = 20000.
Parameters involved in the calculation of the position feedback.
With rotary encoder:
•axis parameter NPULSES (P8) = number of pulses per turn of the encoder = 18000.
•axis parameter SINMAGNI (P10) = Multiplying factor if the encoder is sinusoidal = 200.
•axis parameter EXTMULT (P57) = Multiplying factor of the feedback = 1.
•Axis parameter PITCHB (P86) = Leadscrew pitch = 20.
•Motor gear ratio:
axis parameter INPREV (P87) = Input revolutions =3.
axis parameter OUTPREV (P88) = Output revolutions = 1.
With linear encoder:
•axis parameter PITCH (P7) = linear encoder pitch = 20.
•axis parameter NPULSES (P8) = 0.
•axis parameter SINMAGNI (P10) = Multiplying factor if the encoder is sinusoidal = 0.
•Axis parameter EXTMULT (P57) = Multiplying factor of the feedback = 20

/4

= 5.
Calculation of the motor speed with a command of MAXVOLT for a feedrate of G00FEED:
Motor speed = (G00FEED x INPREV) / (PITCHB x OUTPREV) = (20000 x 3) / (20 x 1) = 3000
rpm.