Section:
Chapter: 3
2
Page
OPERATION WITH 8010/20/25/30 CNC
3.1 ERRORS WHEN WORKING WITH 8010/20/25/30 CNC
* The program does not exist on the disk.
* Error 54. There is no disk on disk drive.
* Error 55. Corrupted data on the disk.
* The program already exists on the disk.
* There is not enough room on the disk.
* Error 57. Writing error or write-protected disk.
* Error 58. Disk reading error.
* Error 59. Dialog error.
* Transmission error.
* Formatting error, non-reusable disk.
* Formatting error, defective disk.
ERRORS
