Page
Chapter: 2
Section:
1
CONNECTION TO A.C. POWER AND TO THE CNC
CONECTION TO A.C.
POWER
2.
CONNECTION TO A.C. POWER
AND TO THE CNC
Atention:
Power switch
This power switch must be mounted in such a way that it is easily accessed
and at a distance between 0.7 meters (27.5 inches) and 1.7 meters (5.5 ft)
off the floor.
Install this unit in the proper place
It is recommended to install the CNC away from coolants, chemical
products, possible blows etc. which could damage it.
2.1 CONNECTION TO A.C. POWER
The unit has on its rear panel a three-prong connector for its connection to A.C. power
and ground.
It allows a universal connection within the following specifications:
A.C. voltage:
Between 100V and 240V +10%, -15%
A.C. power frequency:
50 - 60 Hz.
Ground terminal:
Metric 6mm screw.
