Page
Chapter: 1
Section:
1
CONFIGURATION
FRONT PANEL
1.
CONFIGURATION
Atention:
The Fagor floppy disk unit is ready to be used in industrial environments.
The FAGOR floppy disk unit is a peripheral device for storing data in 3.5" floppy disks
of 720Kb or 1.44Mb of memory capacity.
It permits data exchange with the FAGOR CNC models: 8010, 8020, 8025, 8030 and
8050.
It is also possible to send computer generated programs, tables and files from a computer
out to a floppy disk and from here to the CNC or directly from the computer to the CNC
through the FAGOR floppy disk unit.
The data exchange will be managed by the corresponding CNC and communication can
be established via the two available serial ports, RS-232 and RS-422.
1.1 FRONT PANEL
This unit has no keyboard since all its commands are handled via serial lines.
It only has a green color LED to indicate whether the unit is ON or OFF as well as the slot
for inserting 3.5" format floppy disks.
