Faema E71, Use And Installation

Page: 78 / 328

2 1
3
4 5
English
(1
20. Logo
7XUQWKHPDFKLQHRIIDQGEDFNRQDJDLQZKHQLWFRPHVEDFNRQWKHIROORZLQJ
will appear on the services display:
3UHVV2.DQGZDLWIRUWKH¿OHWRORDG
The Faema standard logos are shown on all the machine
displays, after a period of inactivity set for the "Screensaver"
menu by the technician.
Technical staff can activate the parameter that allows to show on the services display or even on the groups display a
further logo customized by the user.
The machine is supplied with the logo shown in the image (EXPRESS YOUR ART).
The user can replace it with another of the same size that will will appear on all displays (groups and
VHUYLFHVFUHDWLQJWKH¿OH
custlogo.bmp
PD[LPXPVL]H[SL[HOV
$OWHUQDWLYHO\WKHXVHUFDQUHDOL]HDODUJHULPDJHIRUWKHJURXSVGLVSOD\¿OH
logogrp.bmp - 272 x
SL[HOVDQGRQHIRUWKHVHUYLFHVGLVSOD\¿OH
logosrv.bmp
[SL[HOV
To create a customised logo, proceed as follows:
Using any graphics program (e.g. Paint),
FUHDWHD¿OHWKDWPHHWVFHUWDLQFKDUDFWHULVWLFV
the prerequisites for a bitmap image to be
used as a custom logo are:
custlogo.bmp
logosrv.bmp
logogrp.bmp
• width less than
or equal to 260
pixels
• length less than
or equal to 110
pixels .
• 2 4 - b i t b m p
colour.
• width less than
or equal to 272
pixels
• length less than
or equal to 480
pixels .
• 2 4 - b i t b m p
colour.
&RS\LQWRD86%SHQGULYH¿OHV
logogrp.
bmp " and / or " logosrv.bmp " if the user
wants to display a logo for the groups
display and one for the services display.
&RS\ WKH ¿OH
custlogo.bmp " if the user
wants to display the same logo on all
displays.
NOTE: If in the USB pen drive there are all
¿OHVORJRZLOOEHGLVSOD\HGWKHLPDJHRIWKH
¿OH
custlogo.bmp ".
Insert the USB pen drive in the
dedicated slot on the machine:
the icon will appear on the
services display:
Once loading is complete, remove the USB pen drive from the machine.
At this point, the custom logo will be displayed according to the settings
programmed by the technical staff.
Note: If the screensaver is active, it is possible immediately see the logos, without
waiting for idle time, every time the user turns off the analogically gauge.
If in the USB pen drive there is the
¿OH
logogrp.bmp and / or logosrv.
bmp
If in the USB pen drive there is the
¿OH
custlogo.bmp