Mini-Mag Service Manual V1.0
13
13-39
CENTRAL COMMAND CONTROLLER
“PAGE” switch is
in operative.
Operate machine
and verify the
customers
complaint.
Does the switch
work properly?
Instruct owner on
proper machine
operation
Unplug the 20 pin
connector from the
back of the LCD
display
Using and Ohm meter measure
across the 2 green wires (pins 12
and 16). You should have “OL” or
infinite resistance when the switch is
not depressed and you should have
less than one ohm when you press
in the switch.
Did you have the
correct readings?
Replace the display with a
know good display or a
new one and retest the
machine.
Replace the page
button and reset
the machine
Was the
problem
repaired?
NO
YES
NO
Repair is complete
Did this repair
the machine?
YES
YES
Call the factory
NO
MiniMAG- TRACTION DRIVE w/CCII
PAGE SWITCH DIAGNOSIS
1 of 1
Replace the LCD
display
Summary of Contents for MINI-MAG SERIES
