22
www.factorelectronics.com
HDBaseT-4x4Matrix
Factor Electronics
User Page
You can create, edit and remove accounts. PS: The Admin account can't be deleted.
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.
Warranty Policy
Factor Electronics products are warranted against defects in material and workmanship for two
years from the date of shipment. During the warranty period, Factor Electronics will, at its option,
repair or replace products that prove to be defective. Repairs are warranted for the remainder of the
original warranty or a 90 day extended warranty, whichever is longer.
For equipment under warranty, the owner is responsible for freight to Factor Electronics and all
related customs, taxes, tariffs, insurance, etc. Factor Electronics is responsible for the freight
charges only for return of the equipment from the factory to the owner. All equipment returned for
warranty repair must have a valid RMA number issued prior to return and be marked clearly on the
return packaging. Factor Electronics strongly recommends all equipment be returned in its original
packaging.
Factor Electronics obligations under this warranty are limited to repair or replacement of failed parts,
and the return shipment to the buyer of the repaired or replaced parts.
Limitations of Warranty
The warranty does not apply to any part of a product that has been installed, altered, repaired, or
misused in any way that, in the opinion of Factor Electronics, would affect the reliability or detracts
from the performance of any part of the product, or is damaged as the result of use in a way or with
equipment that had not been previously approved by Factor Electronics.
The warranty does not apply to any product or parts thereof where the serial number or the serial
number of any of its parts has been altered, defaced, or removed.
The warranty does not cover damage or loss incurred in transportation of the product.
3
www.factorelectronics.com
HDBaseT-4x4Matrix
Factor Electronics
Introduction
The HDBASET-4X4MATRIX routes four Hi-Def sources to any four HDTV displays, supporting
1080p Full HD up to 4K@30Hz 4:4:4 (or 4K@60Hz, 4:2:0) UHD plus all 3D formats, along with
multichannel digital audio formats such as Dolby® True HD and DTS-
HD® Master Audio™.
Embedded audio extractors can extract the audio and output via L/R or Coaxial. Volume can be
controlled for analog audio out. Based on the HDBaseT Lite chipset the output distance can reach
up to 70m via Cat5e/6.Each source can be routed to any display using the Push Buttons, IR
Remote Control, RS232 Interface, GUI, Web GUI or via TCP/IP
.
.
Features
Supports resolutions up to 4K@30Hz 4:4:4 or 4K@60Hz 4:2:0
HDCP 2.2/HDCP 1.x and DVI compliant
With HDMI mirrored outputs for each HDBaseT output
HDBaseT Lite chipset for output distances up to 70m.
Supports POH, no power supply needed for the Balun Receivers.
Allows any source to be displayed on multiple displays at the same time
Allows any HDMI display to view any HDMI source at any time
Dolby TrueHD and DTS-HD master audio pass through HDMI output
Advanced EDID management for rapid integration of sources and displays
Front-panel LCD display for status feedback
Multiple switching mode -
Push Buttons, IR Remote Control, RS232 Interface, GUI, Web GUI
and TCP/IP
.
Easy installation with included rack-mounting ears
Full 3D pass- through.
Panel Descriptions
Front Panel
1. LCD display -- Shows the status of input-output selection, EDID info and so on.
2. IR receiver window -- Receives the IR from the remote control of the HDBaseT-4x4Matrix.
3. Power LED indicator -- Indicates the power status for the matrix.
4. Power button -- Press to power on/off the matrix.
5. HDMI output selection buttons 1 to 4 -- Press to select the outputs from 1 to 4.
6. All button for HDMI outputs -- Press to select all of the outputs from 1 to 4.
7. Menu button -- Press to enter EDID set mode. Three EDID segments will display on the LCD
panel formatted as: INPUT VIDEO AUDIO, for example: IN1 1080P 2.0CH, means to set 1080P
2.0CH EDID to INPUT1. The blinking segment can be changed currently. Segment content items
listed below:
Summary of Contents for HDBaseT
Page 2: ......
