14
www.factorelectronics.com
HDBaseT-4x4Matrix
Factor Electronics
“1 Output” to “4 Outputs”: Set the current Output (right click the mouse) and the next x-1 (x range is
from 1 to 4, set total x Outputs at the same time) all Output(s) from the same Input
Port to Port: Output1 from Input1, Output2 from Input2, Output3 from Input3, etc.
Edit the selected pre-set
After the action of
⑥
, the edit output form will pop-up below:
①
Pre-Set name
②
Set all Output ports from the same Input
③
Select the Input for the respective Output
“EDID control” page
①
Set the EDID mode for the selected Input port or All Input ports, click the
“Set” button to
complete the action.
NOTE
: When setting User1/User2 EDID mode, download the EDID content to the User1
11
www.factorelectronics.com
HDBaseT-4x4Matrix
Factor Electronics
“Port Tag” page
①
Input port tags
②
Click to edit Input port tags
③
Output port tags
④
Click to edit Output port tags
NOTE
: Edit boxes are read only, click the
“Edit” button to edit the tags in the pop up window.
One set of Input/output port tags can be set for the Matrix device when the COM control mode is
selected.
Input/output port tags can be set for each respective Matrix device according to the
device‟s MAC
address.
Edit Input port tags
After action of
②
, edit form will pop-up as below:
Define tags for respective Input port, then devices connect the Input ports can be easily
remembered.
Summary of Contents for HDBaseT
Page 2: ......
