16
www.factorelectronics.com
HDBaseT-4x4Matrix
Factor Electronics
“FW upgrade” page
①
Click to open firm
ware file (file extension is “.fw”).
②
Firmware upgrade progress
③
Click the button to upgrade the firmware.
NOTE
: If a failure occurs during the upgrading firmware process, the following steps SHOULD be
completed sequentially to establish the next upgrade procedure:
1)
Power down the Matrix
2)
Close the 4x4 HDMI Matrix Controller
3)
Re-power up the Matrix, then wait for 10 seconds to ensure the Matrix is ready
4)
Run 4x4 HDMI Matrix Controller, open firmware file and upgrade again
④
Firmware upgrading messages display
Click to clear the messages displayed in the memo box.
9
www.factorelectronics.com
HDBaseT-4x4Matrix
Factor Electronics
GUI Control
PC System:
Microsoft Windows Operation System
Installation
The HDBaseT4x4 Matrix software controller is green software.Simplycopy the
“4x4 HDMI Matrix
Controller vx.x.exe” to yourPC which is used to control the Matrix by connecting an RS232 COM or
TCP port to complete the installation.
Preparation
1.
Connect the PC and Matrix with the included RS232 cable or UTP cable
2.
Power up Matrix (It will take approx 5 seconds to be ready with a
“Di” beep sound )
3.
Double click the
“4x4 HDMI Matrix Controller vx.x.exe” icon to run it
Commoninformation
Click to select tab page
①
COM port or TCP connect status
②
Control command process status
③
Prompt message display area
④
Date and Time display
“
General
”
page
1
2
3
4
Summary of Contents for HDBaseT
Page 2: ......
