Factor Electronics HDBaseT, Manual

Page: 6 / 14

4
www.factorelectronics.com
HDBaseT-4x4Matrix
Factor Electronics
INPUT VIDEO AUDIO Note
IN1 1080I 2.0CH.
IN2 1080P 5.1CH
IN3 3D 7.1CH
IN4 D1024 D1024=DVI 1024 x 768
IN5 D1080 D1080=DVI 1920 x 1080
IN6 D1200 D1200=DVI 1920 x 1200
IN7 OUT1 OUT1=Copy OUTPUT1 EDID to INPUTx
ALL OUT2 ALL=Set EDID to ALL INPUTs
OUT2=Copy OUTPUT2 EDID to INPUTx
OUT3 OUT3=Copy OUTPUT3 EDID to INPUTx
OUT4 OUT4=Copy OUTPUT4 EDID to INPUTx
OUT5 OUT5=Copy OUTPUT5 EDID to INPUTx
OUT6 OUT6=Copy OUTPUT6 EDID to INPUTx
OUT7 OUT7=Copy OUTPUT7 EDID to INPUTx
OUT8 OUT8=Copy OUTPUT8 EDID to INPUTx
8. Up selection button -- Press to change a
segment‟s value.
9. ESC -- Press to quit EDID set mode.
10. Lock LED indicator -- Indicates the status of Lock.
11. Lock button -- Press to lock the buttons of the front panel.
12. HDMI input selection button 1 to 4 -- Press to select the inputs from 1 to 4.
13. PTP button -- Press to mirror all inputs and outputs (e.g. output 1 to input1, output 2 to input2
and so on).
14. Selection button -- Press to select a segment to change settings. The selected segment will be
blinking.
15. Down select button -- Press
to change segment‟s value.
16. Enter button -- Press to set the EDID to a specified INPUT or copy the EDID from a specified
OUTPUT to a specified INPUT.
Back Panel
1. GND -- Connect to ground if necessary.
2. IR inputs 1 to 4 -- 3.5mm stereo phone-jack, connect to an IR receiver
3. IR outputs 1 to 4 -- 3.5mm mono phone-jack, connect to an IR transmitter cable.
4. RS232 port with each HDBT out -- Connect to a PC, RS232 extension to the Balun.
5. Coaxial digital audio output -- Extracted audio corresponds with the HDMI video output
6. L/R analog audio output -- Extracted audio corresponds with the HDMI video output.
7. TCP/IP port
– TCP/IP control
8. RS232 port
–To control the matrix from a PC or control processor
21
www.factorelectronics.com
HDBaseT-4x4Matrix
Factor Electronics
EDID Page
You can select built-in EDID patterns for each input, and select EDID priority for HDMI/HDBT.
Audio Page
You can select audio sources for each output, set audio delay values, and control the audio
volume.in each zone