16
3 OPERATION
In the F85CV - F120- F240 models
3.1 PRELIMINARY CONTROLS
WARNING! Before starting up the
machine make sure that:
- The power grid’s general switch is turned
off (pos. OFF).
- The machine’s general switch is turned
on 0 (pos.A fig. 11).
- All installation and assembling has been
performed correctly, especially during
orientation of the vents.
3.2 STARTUP (summer)
Turn on the machine’s general switch (fig.11 pos.B).
Turn on the fumes vent by pressing its button (fig.12
pos.1).
Load the fuel using the grid in the machine’s upper
part.
Turn on fuel loading and wait for combustion to start
up.
WARNING!
Do not use liquid fuel.
WARNING!
If the machine has got a fumes vent, do
not turn it off during combustion.
To adjust combustion, regulate suction power in the
lower (fig.13 pos.3).
The thermostat that regulates the vents’ startup is already
set at a temperature between 30°C and 40°C.
The alarm’s thermostat is already set to activate at
90°C.
When the desired temperature has been reached, the
air vents will activate automatically (press the white
button, turn it on automatic position) (fig.14).
3.2.1 STARTUP (summer)
IMPORTANT: to turn on cold air
circulation, press the fumes vent
button (pos.3 fig.16) in absence of
combustion.
0
1
0 1
0 1
A
B
FIG.11
1
0
FIG.12
Fumes vent for solid
combustion
FIG.13
3
2
1
FIG.14
Off fumes
ven
