X 1
X 1
ENGLISH
24
X 1
X 2
X 3
MOTOR MOVEMENTS IN BOTH
DIRECTIONS ON SWITCHING-ON
MOTOR STATUS
0 MOVEMENTS
TRAVEL LIMITS SET AND MOTOR READY TO START
1 MOVEMENT
FACTORY SETTING
(opening and closing travel limits not set, perform the set-up procedure and, if
necessary, the adjustment of the torque and of the obstacle detection sensitivity)
2 MOVEMENTS
TRAVEL LIMITS SETTING PROCEDURE NOT COMPLETED
ONLY UP TRAVEL LIMIT SET
(Execute a reset and then the travel limits setting procedure)
3 MOVEMENTS
YOU ARE IN THE ADVANCED MENU (see chapter 9)
( hold down the STOP/PREFERRED POSITION push-button to exit )
IF YOU WANT TO CHECK THE MOTOR STATUS, CUT POWER TO IT, SUPPLY POWER AGAIN AND CHECK THE NUMBER OF MOVEMENTS
PERFORMED BY THE MOTOR (independently of the fact if there are or not memory stored radio accessories)
10.2 MODIFYING THE PREFERRED POSITION
1) Press the stop/preferred position push-button for 4 seconds to delete the position previously stored in the memory.
2) The motor performs a brief movement in both directions to confirm the performed deletion
If you want to set a new preferred position, perform the procedure described in chapter 10.1
10 PREFERRED POSITION
10.1 MEMORY-STORING THE PREFERRED POSITION
A P R E F E R R E D P O S I T I O N C A N B E D E F I N E D O N T H E R O L L I N G S H U T T E R . T H I S P O S I T I O N C A N
ONLY BE REACHED WHEN THE MOTOR IS AT REST BY PRESSING THE STOP/PREFERRED POSITION PUSH-BUTTON.
THERE IS NO MEMORY STORED PREFERRED POSITION BY FACTORY SETTING. THE PREFERRED POSITION CAN ONLY BE MEMORY
STORED AFTER HAVING SET THE TRAVEL LIMITS
1) Press the up or down push-button to operate the motor.
2) Once the “preferred position” has been reached, press the stop/preferred position push-button to lock the rolling
shutter.
3) Press the stop/preferred position push-button for 4 seconds to memory store the position.
4) The motor performs 2 brief movements in both directions to confirm the performed memory storing.
5 seconds
DETECTION END AREA
OBSTACLE DETECTION
AREA
11 TROUBLESHOOTING
