X 3
X 3
ENGLISH
15
1) Press the up or down push-button, take the awning to the selected position for the up travel limit and release the
push-button.
2) Press
3 TIMES
the stop/preferred position push-button for 2 seconds. Release it for 1 second and
hold it down again
until the motor performs 3 brief movements in both directions to check the correct setting of both the cassette
awning mode and the up travel limit.
3) Press the push-button controlling the lowering and go to the down travel limit.
4) Press the stop/preferred position push-button until the motor performs a brief movement in both directions.
5) Check if the travel limit positions have been set correctly. If the travel limits have not been set correctly, execute a
reset and repeat the set-up procedure.
5.4 SET-UP FOR CASSETTE AWNING
BEFORE COMPLETING THE SET-UP, THE MOTOR COULD ROTATE IN THE OPPOSITE DIRECTION TO THE GIVEN COMMAND (E.G.:
YOU SEND A RISE PULSE FROM THE REMOTE CONTROL AND THE AWNING LOWERS) ; AT THE END OF THE SET-UP, THE UP AND DOWN
PUSH-BUTTONS ARE AUTOMATICALLY MATCHED TO THE CORRECT DIRECTION OF ROTATION.
UP
TRAVEL LIMIT
OR
PRESS THE UP OR DOWN PUSH-BUTTON AND TAKE THE AWINING TO THE UP TRAVEL
LIMIT
PRESS 3 TIMES THE STOP/PREFERRED POSITION PUSH-BUTTON FOR 2 SECONDS, RELEASE IT FOR 1 SECOND AND
HOLD IT DOWN AGAIN UNTIL THE END OF THE INDICATED MOVEMENTS TO CONFIRM THE PERFORMED MEMORY
STORING OF THE UP TRAVEL LIMIT.
1 second
WITHIN 3 SECONDS
Every pressing
2 seconds
5.4.1 SET-UP FOR CASSETTE AWNING STARTING FROM THE UP TRAVEL LIMIT
