18
F1
Battery and motor fuse F20A
J2
Bus connection terminal board
J3
Motor connection terminal board
J4
Connector for Power Supply Unit
J5
Connector for 230Vac-50Hz Power
9. SLAVE-T BOARD LAYOUT
J1, J6, P1, P2 and LED are not present on the SLAVE-T board, and
the other elements have the following functions.
Fig. 7
Diagnostics LED
( LED P )
Programming LED
P2
P1
J1
J3
F1
J4
J3
SLAVE-T CONTROL BOARD
MASTER-T CONTROL BOARD
Toroidal
transformer
Power supply
board
Note:
the Power Supply Unit consists of the toroidal transformer
and the power supply board.
J4
J2
F1
J6
P1
Programming push-button: "Function"
P2
Programming push-button: "Value"
F1
Battery and motor fuse F20A
J1
Accessories terminal board
J2
Not used
J3
Motor connection terminal board
J4
Connector for Power Supply Unit
J5
Connector for 230Vac-50Hz Power
J6
Connector for Decoder-Minidec/RP Receiver
10. MASTER-T BOARD LAYOUT
J5
J5
8. WARNINGS
Attention: Before attempting any job on the control board (connections, maintenance), cut out electric power.
-Install, upstream of the system, a differential thermal breaker with adequate tripping threshold.
-Always separate 230Vac power cable from control and safety cables (push-buttons, receiver, photocells, etc.). To avoid
any electric noise, use separate sheaths or a shielded cable (with earthed shield).
J2
Summary of Contents for MASTER-T
Page 15: ......