24
14. REPAIRS
For any repairs, contact authorised Repair Centres.
13. MAINTENANCE
Carry out the following jobs at least every 6 months:
•Check if the anti-crushing facility is correctly set.
•Check the efficiency of the release system (see instructions on
Domolink and Domoswing operators).
•Check the efficiency of the safety devices and accessories.
12.5
Status of indicator light
If you wish to use a 12V-0.5W indicator light (terminal 9 - 11 of J1,
see Fig. 8), the following table shows the statuses of the indicator
light according to gate position.
Tab. 4
- Statuses of indicator light
Gate status
Closed
Open - Open in pause
Closing
Opening
Locked
Indicator-light status
Light Off
Lighted
Flashing
Lighted
Lighted
12.6
Testing the automated system
After programming, run an accurate functional check of the
automated system and of all the accessories connected to it,
especially the safety devices.
Summary of Contents for MASTER-T
Page 15: ......
