Estate Slide E-SL 1200
Control Board Layout
ATTENTION: Study the control board and read this section thoroughly before attempting to
operate your gate opener.
Warnings:
Before attempting any job on the control board (connections, maintenance), turn off electrical power and unplug the
support battery.
Install a surge protector upstream of your opener, the opener is not power surge proof not will power surge damage be
covered under warranty.
Always separate power from control and safety cables (push
-
buttons, receivers, photocells, etc.). To avoid any electri-
cal noise, use separate sheaths or a shielded cable (with earthed shield)
Layout of Control Board
DO NOT alter position from
factory.
LED
Programming LEDs
P
Power ON and diagnostics LED
P1
“Function” programming push
-
button
P2
“Value” programming push
-
button
F1
Battery and motor fuse
-
F15A
J1
Accessories Terminal board
J2
Transformer or Solar Terminal
J3
Motor connection terminal
J4
Battery connector
J5
433 receiver
J10
Sensor Terminal Board
7.1