Estate Slide E-SL 1200
IMPORTANT: Charging Battery Prior to Use
Before beginning any electrical stages of installation, we highly recommend charging the battery on the control board
for
12 hours
. This can be done anywhere where an outlet is available.
1.
Plug the battery into the control board (fig. 1). For charging purposes it is not necessary to hook the receiver to the
battery or control board.
2.
Insert the wires from the supplied AC transformer into the terminal J2 of the control board.
NEVER RUN 110V
AC OR POWER THROUGH ANY OTHER METHOD BESIDES THE PROVIDED TRANSFORMER
TO THE CONTROL BOARD.
3.
Let the unit charge for 12 hours, you can proceed with the installation process after battery is charged.
!
Fig. 1
4.1
