C850
5
532015 - Rev.B
T
ranslation of the original instructions
ENGLISH
C850
We thank you for choosing this product. We are certain that it will fully meet your needs as to the performance it has been designed for.
This product has been designed and built for vehicle access control. AVOID ANY DIFFERENT USE.
Carefully read this manual supplied with the product as it contains important instructions regarding safety,
installation, use and maintenance.
1 GENERAL
These instructions apply to the following models:
C850
The C850 is an electromechanical operator designed for moving sliding gates.
The non-reversing system is guaranteed by an electric brake that prevents manual movement of the sliding leaf when the motor is
stopped, and therefore does not require an electric lock.
A handy manual release makes it possible to manoeuvre the gate in case of black-out or operator inefficiency.
C850 TECHNICAL SPECIFICATIONS
Power supply (+6% / -10%)
230 V~ 50 Hz
Limit switch type
Mechanical
Max absorbed power (W)
1800
Motor control
Inverter
Thrust on pinion (N)
1800
Usage temperature (°C)
-20 +55
Max torque (Nm)
110
Gearmotor weight (kg)
49
Pinion type
Z28 module 4
Protection class
IP54
Recommended max gate length (m)
20
Gearmotor dimensions
See Fig.02
Max leaf weight (kg)
1800
Frequency of use
INDUSTRIAL
Gate speed (m/min)
min 20
max 42
R.O.T.
CD continuous duty
2 DESCRIPTION AND TECHNICAL SPECIFICATIONS
Fig. 1
1. Cover
housing
2. Motor
3. Gearmotor
4. Cover for electronic gearmotor
5. Gearmotor release knob
6. Inverter
7. Foundation plate (not supplied)
8. Cable routing hole
9. Pinion
10. Control board
11. Limit switch
12. Electric brake